Huatao Group-Vibrating Screen Technology Solution and Service для карьера & Горнодобывающая промышленность с 2008 года.
Complete Guide to Polyurethane Screen Installation: Step-by-Step Methods <000000> Expert Tips
Complete Guide to Polyurethane Screen Installation
Pre-Installation Preparation
Screen & Equipment Inspection
Verify screen dimensions and model compatibility.
Check for defects like cracks, deformation, or blocked meshes.
Ensure the frame is flat and all connections are secure.
Tools & Материалы
Tools: Wrenches, screwdrivers, rubber hammers.
Supplies: Sealant (anti-leakage), gaskets (enhanced friction).
Three Key Installation Methods
1. Expansion Nail Type
Технические характеристики
: 305×305×30 (four semi-circular holes)
Steps
:
Place the screen on the vibrating screen’s support beam.
Align expansion nail holes between adjacent screens.
Hammer nails vertically into holes, noting the mesh direction
2. Bolt Type
Bolts
: M12, M14, M16
Steps
:
Arrange screens sequentially on the support beam.
Align mounting holes on screens and beams.
Secure with tension bolts, adjusting tightness appropriately.
3. Rail Seat Type
Customization
: Requires manufacturer-specific rail seats
Steps
:
Fix rail seats to the support beam first.
Align screen grooves with rail seat protrusions.
Ensure firm placement to prevent displacement.
Technical Support & Contact
Need assistance? Huatao Group offers free expert solutions:
Contact : Annie Lu
Email : annie.lu@huataogroup.com
Phone/WhatsApp : 008618032422676
Веб-сайт : http://www.huataoscreen.com