Huatao Group-Vibrating Screen Technology Solution and Service for Quarry & Mining Industry Since 2008.
A mobile gold wash plant is worth the investment when mining locations change frequently, the project operates in remote areas, the mining license or operating period is limited, or several deposits need to be processed over time. For large-scale operations with stable production and long-term mining plans, a stationary processing plant may offer better overall economics. Evaluate total project life cost — not purchase price alone.
✔ Flexibility is the primary advantage — one plant can serve multiple mining locations
✔ Pre-integrated trailer, skid and modular designs reduce on-site assembly work
✔ Mobile plants suit small and medium-scale alluvial mining with staged capacity expansion
✔ Sticky clay requires a trommel scrubber; a standard trommel screen provides insufficient washing action
✔ Fine gold losses must be verified by representative testing before adding a centrifugal concentrator
✔ Transportation, reinstallation and commissioning costs belong in every ROI calculation
✔ Stationary plants remain better for high-capacity, long-term, multi-stage operations
| Item | Description |
|---|---|
| Function | Washing, screening and gravity recovery of alluvial and placer gold |
| Mounting | Trailer, skid or modular frame for relocation between sites |
| Typical Configuration | Feed hopper, trommel scrubber or gold trommel screen, sluice box, centrifugal gold concentrator, shaking table, water supply and recycling system |
| Application | Remote sites, temporary locations, multi-deposit contracts, small and medium-scale alluvial mining, pilot programs |
| Service Life | Structural components long-life; screen media, sluice matting and pump wear parts are consumables |
| Key Benefit | Relocation flexibility with reduced installation requirements |
| Main Risk | Underestimating transportation, reinstallation and commissioning costs |
A mobile gold wash plant is an integrated mineral processing unit that washes, screens and recovers gold from alluvial or placer deposits, mounted on a trailer, skid or modular frame so it can be relocated between mining sites. It combines feeding, washing, screening and gravity separation equipment into a transportable configuration, reducing the need for permanent foundations, structural supports and fixed infrastructure.
This distinguishes it from a stationary gold wash plant, which is built for a single long-term site and is typically configured for higher continuous throughput with multiple washing and recovery stages. The distinction drives the entire commercial evaluation, because a mobile plant trades some capacity and process complexity for relocation flexibility.
Raw gold-bearing gravel is loaded into a feeding hopper. A suitable hopper and feeder help maintain a consistent feed rate and prevent uneven material distribution. For larger mobile plants, a vibrating feeder may be used to control material flow more effectively.
The material then enters either a trommel scrubber or a gold trommel screen. A trommel scrubber is designed to wash and break down clay agglomerates and is particularly useful for sticky or compacted alluvial material. A gold trommel screen primarily separates material by particle size, removing oversized rocks while allowing smaller gold-bearing material to pass through the screen openings. For deposits containing significant sticky clay, a standard screening trommel may not provide sufficient washing action.
The screened undersize reports to a sluice box, which uses flowing water and riffles or specialized recovery matting to capture heavy gold particles. The sluice box is commonly installed after the washing and screening stage to recover gold from a large volume of prepared material. Its design, water flow, feed rate and matting all influence recovery performance.
Where testing indicates that conventional gravity equipment is losing fine gold to the tailings, a centrifugal gold concentrator can be added to the mobile processing circuit. It uses enhanced gravity generated by rotation to recover suitable fine, liberated gold particles. Its inclusion should be based on actual feed characteristics and recovery requirements rather than simply adding more equipment to the plant.
Gravity concentrate is subsequently cleaned and upgraded on a shaking table, which separates particles through deck movement and flowing water. Depending on plant design, the shaking table may be installed as a separate finishing stage rather than directly on the mobile unit.
Water management is essential. A complete system may include water pumps, pipelines, spray nozzles, settling ponds and recycling equipment. In remote mining locations, a suitable water recycling arrangement can reduce freshwater demand and improve operating efficiency.
Easy transportation between mining sites. Alluvial gold deposits are often distributed across large areas, and mining conditions can change as operations progress. A mobile gold wash plant can be transported to a new mining location when the current deposit becomes less productive or when another area becomes available. This flexibility is particularly valuable for contractors and mining companies working on multiple projects. Instead of investing in separate processing facilities for every location, operators may be able to use the same plant across different mining areas, provided transportation and site conditions are suitable.
Reduced installation requirements. Traditional stationary gold wash plants may require substantial site preparation, foundations, structural supports and permanent infrastructure. Many mobile plants use integrated or modular equipment arrangements that can reduce on-site assembly requirements. Depending on design, equipment may be mounted on a trailer, skid or modular frame. This can help reduce installation work and make it easier to start production at remote mining sites. However, mobile equipment still requires suitable ground conditions, access roads, water supply, power and safe working space.
Faster project setup. For mining projects with limited operating seasons or short production schedules, project preparation time can have a direct impact on profitability. A pre-integrated mobile plant may reduce the time needed for equipment assembly and commissioning. The actual setup time depends on plant capacity, transportation arrangements, site preparation and the complexity of the processing system. Mining companies should request a complete installation plan rather than assuming that every mobile plant is ready for immediate operation.
Flexible investment for small and medium-scale mining. Mobile gold wash plants are often suitable for small and medium-scale alluvial mining operations. They allow operators to select a processing capacity that matches the available raw material and gradually expand their equipment configuration as production requirements increase. For new mining projects, starting with a suitable mobile system may help control initial infrastructure investment.
Alluvial and placer gold deposits distributed across large areas, where mining conditions change as operations progress.
Remote mining locations where permanent infrastructure would be expensive or impractical to construct.
Short-license or limited operating periods where building a stationary facility cannot be justified economically.
Multi-deposit contracts where a contractor processes several sites sequentially over time.
Small and medium-scale mining operations seeking to match capacity to available raw material and expand gradually.
Pilot and bulk sampling programs where representative material testing is required before committing to a fixed plant.
The mobile gold wash plant occupies the washing, screening and gravity separation stages of the alluvial gold process flow.
Previous Stage — Feed Preparation and Crushing. For alluvial deposits, feed preparation is usually limited to screening out oversized material. Where hard-rock or cemented material is present, crushing equipment may be required upstream, along with crusher wear parts such as jaw plates, mantles and concaves.
Current Stage — Washing, Screening and Gravity Separation. This is the core of the mobile plant: feeding, trommel scrubbing or screening, sluice box recovery, centrifugal concentration and shaking table upgrading. Screen media selection directly affects wear life and screening efficiency in this stage.
Next Stage — Concentrate Handling, Dewatering and Tailings Management. Gravity concentrate requires cleaning, drying and secure handling. Tailings from the wash plant typically report to settling ponds, thickeners or tailings management systems. Where water recycling is required, dewatering and filtration equipment may be integrated into the circuit.
| Feed Condition | Recommended Equipment | Engineering Reason |
|---|---|---|
| Low clay, free-flowing gravel | Standard gold trommel screen | Size separation alone is sufficient |
| Significant sticky or compacted clay | Trommel scrubber | Scrubbing action breaks down clay agglomerates that blind standard screens |
| Coarse gold dominant | Sluice box with matched riffles and recovery matting | Coarse heavy particles captured effectively by gravity |
| Fine liberated gold losses confirmed by testing | Add centrifugal gold concentrator | Enhanced gravity recovers fine particles conventional gravity equipment misses |
| Mixed coarse and fine gold | Sluice box + centrifugal concentrator + shaking table | Staged recovery followed by concentrate upgrading |
| Abrasive gravel with high wear duty | Polyurethane or rubber screen panels | Extended wear life versus wire mesh in abrasive duty |
| Criterion | Mobile Plant | Stationary Plant |
|---|---|---|
| Transportation | Designed for easier relocation | Usually requires more dismantling and transportation work |
| Installation | Often reduced on-site assembly | May require foundations and more infrastructure |
| Site flexibility | Suitable for changing mining locations | Better for stable, long-term sites |
| Initial investment | Can be lower for some project configurations | May require higher infrastructure investment |
| Processing capacity | Available in different capacities depending on design | Can be configured for larger capacities and continuous operations |
| Expansion | Often easier to integrate into a larger fixed processing facility | May require additional modules or equipment |
| Relocation | Still requires transport and setup expenses | Relocation can be more complicated and expensive |
| Best fit | Remote, temporary, multi-site, limited license | Long-term, high-volume, multi-stage, existing infrastructure |
A mobile plant may provide better economics when mining locations change frequently, the project operates in remote areas, the mining license or operating period is limited, several deposits need to be processed over time, permanent infrastructure would be expensive or unnecessary, and the required processing capacity is compatible with a mobile configuration.
A stationary plant may be more suitable when the mining area has a long-term production plan, large and consistent feed volumes are available, high processing capacity is required, permanent water and power infrastructure is already available, the project requires multiple washing and recovery stages, and future expansion is expected. The most cost-effective solution should be evaluated over the entire project life, not simply by comparing initial purchase prices.
| Mining Scenario | Mobile Plant Suitability | Engineering Notes |
|---|---|---|
| Alluvial gold, single long-term site, high TPH | Low | Stationary plant more economical at scale |
| Alluvial gold, contractor with several sites | High | One unit serves multiple deposits |
| Remote deposit, no grid power or permanent water | High | Reduced infrastructure requirement |
| Short mining license, one to three seasons | High | Faster setup, lower sunk capital |
| Placer gold with sticky clay content | High (with trommel scrubber) | Scrubbing action essential |
| Large-scale continuous operation, multi-stage recovery | Low | Stationary configuration preferred |
| Pilot bulk sampling program | High | Relocatable, staged investment |
| Deposit with confirmed fine gold losses | Conditional | Verify by testing before adding concentrator |
| Tailings reprocessing at multiple sites | High | Relocation between tailings facilities |
Confirm project duration and site stability. Temporary or multi-site projects favor a mobile plant; long-term single sites favor stationary.
Establish required processing capacity in tonnes per hour. Match capacity to available raw material, not theoretical maximum output.
Characterize the feed material. Clay content determines trommel scrubber versus trommel screen selection. Gold particle size distribution determines recovery equipment selection.
Verify gold recovery by representative testing. Advertised equipment capacity or theoretical recovery figures should not be treated as guaranteed production results. Monitor feed grade, concentrate grade, tailings grade and total recovered gold.
Map water and power availability. Remote sites require water recycling arrangements and independent power supply planning.
Calculate total project life cost. Include purchase, transportation, installation, relocation, operating costs and residual value.
Request a complete installation plan. Setup time depends on plant capacity, transportation arrangements, site preparation and system complexity.
Required Information:
Gold deposit type: alluvial or hard-rock
Required processing capacity (TPH)
Raw material characteristics and clay content
Approximate gold particle size, if known
Available water and power supply
Whether a mobile or stationary configuration is required
Drawings and Documentation Needed:
Plant layout and transport dimensions
Equipment arrangement drawing
Water balance and recycling schematic
Electrical load list
Material Selection Considerations:
Screen media type relative to abrasive wear duty
Sluice matting specification relative to gold particle size
Wear component availability and lead time at your location
Commercial Terms to Confirm:
MOQ (typically one unit for integrated plants)
Lead time from order to shipment
Packaging and shipping method
Inspection standards and factory acceptance testing
Initial spare parts recommendation
Supplier Evaluation Checklist:
Can the supplier manufacture according to drawings and site constraints?
Can the supplier provide material reports for wear components?
Can the supplier support OEM replacement of screen media and matting?
Does the supplier have export experience to your region?
Can the supplier provide wear-life recommendations based on your feed material?
Can the supplier provide a complete installation and commissioning plan?
| Problem | Possible Cause | Recommended Solution |
|---|---|---|
| Premature screen wear | Abrasive ore, incorrect screen media selection | Upgrade to polyurethane or rubber screen panels matched to wear duty |
| Trommel blinding | Sticky clay, insufficient scrubbing action | Replace trommel screen with trommel scrubber |
| Low gold recovery | Incorrect sluice matting, excessive feed rate, insufficient water flow | Review sluice design, water flow and feed rate; test matting options |
| Fine gold lost to tailings | Conventional gravity equipment limitations | Add centrifugal concentrator after verification testing |
| Excessive downtime | Poor maintenance access, missing spare parts | Improve platform access; establish spare parts inventory |
| Poor fitment of wear parts | Non-OEM or incorrectly specified components | Source parts against OEM drawings and part numbers |
| Structural cracking during relocation | Inadequate transport bracing | Request transport bracing design from the supplier |
| Inconsistent feed rate | Undersized or incorrectly set feeder | Review hopper and feeder design against target capacity |
Daily inspection: Check screen media condition, sluice matting position, water flow rate, feeder operation and visible wear on high-wear zones.
Weekly inspection: Inspect trommel shell and lifters, check pump performance, review water recycling system for blockages, and verify fasteners on vibrating components.
Monthly inspection: Measure wear on screen panels and replace at recommended thickness limits; inspect structural welds; review concentrate and tailings grades against baseline.
Wear pattern monitoring: Record wear rates by zone to predict replacement timing and prevent unplanned downtime.
Replacement timing: Screen media and sluice matting are consumables; establish replacement intervals based on measured wear rather than calendar time.
Spare parts inventory: Maintain minimum stock of screen panels, matting, pump wear parts and fasteners — particularly critical at remote sites.
Preventive maintenance: Schedule inspections before seasonal startup and after each relocation; verify bracing and alignment after transport.
Customer Type: Alluvial gold contractor operating multiple small deposits
Ore Type: Alluvial gravel with moderate sticky clay content
Operating Conditions: Remote sites, seasonal operation, no permanent grid power, deposits worked sequentially
Problem: Building a separate stationary facility at each deposit was uneconomical, and setup time consumed a significant share of each short operating season
Solution: One mobile gold wash plant with trommel scrubber, sluice box and water recycling system, relocated between deposits as each was worked out
Result: Avoided duplicate stationary facility construction across sites; reduced per-site setup work through pre-integrated design; improved utilization of the single processing unit across the operating season. Actual recovery and payback figures depend on feed grade, gold price and site-specific conditions, and should be established by representative testing and project-specific financial modeling.
A mobile gold wash plant should be evaluated according to its total economic contribution, not just its purchase price. The main objective is to determine whether the equipment can generate sufficient additional value through gold recovery and operational flexibility to justify the investment.
Initial Investment Costs: Purchase price, transportation and delivery, installation and commissioning, site preparation, pumps, pipelines and water systems, electrical or power supply equipment, and initial spare parts and operating tools.
Operating Costs: Fuel or electricity, labor, water supply and pumping, maintenance and replacement parts, screen media and wear components, equipment transportation and relocation, and downtime and production interruptions.
Gold Recovery Performance: Gold recovery has a direct impact on project revenue. If a mining operation processes 100 tonnes of ore per day, the gold content of the feed and the actual recovery rate determine how much gold is recovered. However, recovery performance should be established through representative testing.
Equipment Relocation Benefits: For projects with several deposits, relocation may reduce the need to purchase separate processing equipment or construct multiple stationary facilities. Include transportation, dismantling, reinstallation and commissioning costs in the calculation.
A Simple ROI Calculation:
Annual Net Operating Profit = Annual Revenue from Recovered Gold − Annual Operating Costs
Simple Payback Period = Initial Investment ÷ Annual Net Operating Profit
For a more complete investment assessment, consider taxes, financing costs, equipment depreciation, project duration and the residual value of the plant. A mobile plant is worth investing in when its expected financial benefits over the project life justify its total purchase, operating and relocation costs.
A mobile gold wash plant can be a valuable investment for mining companies that need flexibility, relatively simple installation, and the ability to move equipment between different deposits. It is particularly attractive for alluvial and placer gold mining projects where mining locations may change over time.
However, mobility alone does not guarantee good production results. The plant must still provide sufficient washing capacity, appropriate screening performance, and effective gravity separation for the actual material.
HUATAO Group supplies mining screening products, wear parts, and mineral processing equipment for different mining applications, including gold trommel screens, trommel scrubbers, vibrating screens, sluice boxes, centrifugal gold concentrators, shaking tables, and related gold processing equipment options.
Related Products
Related Technical Guides
IMPROVE FINE SCREENING EFFICIENCY WITH POLYURETHANE SCREEN PANELS
HYDROCYCLONE WEAR: ROOT CAUSES, HIGH-WEAR ZONES & MATERIAL SOLUTIONS
ROTOR & STATOR IN MECHANICAL FLOTATION CELLS: THE HEART OF EFFICIENT MINERAL FLOTATION
FLOTATION CELL ROTOR AND STATOR WEAR PARTS: HOW THEY CONTROL RECOVERY, FLOW AND MAINTENANCE COST
Related Buyer Guides
HOW DO I CHOOSE THE RIGHT RUBBER BELT FOR A VACUUM BELT FILTER?
WHICH MANUFACTURER OFFERS HIGH-QUALITY POLYURETHANE TUFFLEX WIRE SCREENS FOR MINING?
Related Comparison Articles
POLYURETHANE SCREEN VS RUBBER SCREEN VS WIRE MESH: A COMPLETE COMPARISON GUIDE
SELF-CLEANING SCREEN VS TRADITIONAL WOVEN WIRE MESH: WHICH ONE SHOULD YOU CHOOSE?
Annie Lu
Email: annie.lu@huataogroup.com
Mobile: +86 18032422676 (WhatsApp / WeChat)